MAINTENANCE & PARTS Malaysia, Negeri Sembilan, Nilai Manufacturer, Supplier, Supply, Supplies

MAINTENANCE & PARTS

Old Machine Repair & Retrofitting

Services Available Include:

Inspection of old machine to identify repair works needed
Submission of Repair, Reconditioning or Retrofitting Proposal
Provision of new parts & equipment + Electrical Works Repair/Fittings
Carry out works inside our shop as well as at site where suitable

Test running of completed works to achieve blasting quality expected
Technical documentation & handing over equipment to client

WEBLAST has in stock a wide range of parts needed for blasting machine;

The main blasting cabinet

Blast lining manganese steel plates, high chromium steel fastener, rollers, cabinet seal, rubber curtain or polycarbonate fingers

The blast Wheel Units

Consisting of the motor, housing, side liners, end liners, top liner, blade cage, wheel blades, control tube, impeller, feed chute, abrasive valves and abrasive hose

The Material Handling Conveyor

This could be rollers, overhead chain hangers, motor & drives mechanism, belts, chains

The Abrasive Recovery System

The screw conveyors, bucket elevator, air wash separator, rotary screen

The Dust Collector

Ventilation design and collector sizing with full range of parts; sock type filter bags, filter cartridges, diaphragm valves, reverse pulse jet cleaning & timer control panel, duct works, centrifugal fan, rotary gate valves

The Control System

The electrical control design, provision of component parts in combination of pneumatic system and hydraulic system where it is needed

Dust Collectors

Conventional Cartridge Collector

Model CDC4	Model CDC18	Model CDC Dust Collector CDC4 2000CFM 3HP CDC6 3000CFM 5HP CDC8 4000CFM 7.5HP CDC12 6000CFM 10HP CDC18 9000CFM 15HP CDC24 12000CFM 20HP CDC36 18000CFM 30HP
			Filter Cartridge Type Eg. CDC4 = 4 Cartridges Cartridge Model 660FA325 Height 660mm x Diameter 325mm Filter Efficiency 90-95% Automatic Pulse Jet Reverse Filter Cleaning System

Down Flow Type Cartridge Collectors

Model	CFM	HP
2DF8 3DF12 3DF16 3DF24 3DF36	4450 5750 7670 9300 14000	7.5 10 15 20 25
Model Naming, Eg. 2DF8 = 2 rows 8 cartridges Cartridge Code 660DO325 size 660mmH x Diameter 325mm Filter efficiency 90-95% Automatic pulse jet reverse filter cleaning system installed

Sock Type Filter Bag Dust Collector

Model FbDc Filter bag type collector installed for blasting rooms

Full Line Supplies for your own DIY needs;

Design detailed drawings
Fabrication of steel works
Various filter material as choice
Automated cleaning control unit

Centrifugal suction fan of all sizes
Explosion proof setup available
Lasting galvanized duct works
All environment friendly installation

Design sized to meet your specific required air flow capacity.

DIY Your Own Blasting Equipment

Buy Parts From Us!

We represent WEBLAST & WBM

In provision of parts & technical support sales

We are FULL-LINE SUPPLIER for all items you may need to build a machine type Rotary Table, Tumblast, Spinner Hanger, Monorail, Roll-Conveyor, Skew-Roll Pipe, Suction Blast Cabinet, Air Filters, Automated Components & Electrical Control system or components. Call Us to Discuss Your Needs

Centrifugal type wheel that does the propelling of abrasive at a continuous high speed stream of shots hitting the material surface resulting in surface cleaning, was invented in the early years of 1900.

The blast wheel has since been redesigned and fine tuned many times in application methods and advancing material technology. The nature of severe wear and tear in abrasive blasting requires the wheel component to be made durable for a reasonable operation time before changing the parts.

Each blast wheel cleaning capacity is defined by its related horsepower rating. WEBLAST can supply the full range that might be needed for a job. Generally, we recommend the sizes below:

HP	5.5	10	15	20	25	30	50
Kw	4	7.5	11	15	18.5	22.5	37.5

Call us to find out what horsepower of the blast wheel is suitable for your application.

Buying Parts for DIY Projects

We show you a partial list of items needed for your DIY projects here.

Blast Pots & Related Parts

Blast pots are pressurized, tank like containers, filled with abrasive material, used to allow an adjustable amount of blasting grit into the main blasting line.

We are importing all items suitable for your application. Call us to check on stock available.

The most productive combination of parts for a blast pot assembly allows for shut-off of compressed air and abrasive grits separately. A handy radio signal button switches control such,

Button Combination	Air Valve	Grit Valve
0 0 1 0 1 1	Off On On	Off Off On

This allows full control by the blaster himself without assistance from others to begin the air line, turn on the grit valve, shutting off the grit valve only & finally shut off the air supply.

The abrasive valve has a full adjustment range for abrasive flow from very small to maximum. It also means the possibility of changing blast gun size with a smaller hose for different types of work. Allowing full capability in a single blast pot combination.

Wet Blast Cleaning

Do you have soiled & dirty equipment such as an excavator or truck that requires old paint removal for recoating works?

We can provide non-destructive dust free wet blast reconditioning equipment for such cleaning purposes.

Model DB225 Blast Tank Specification Includes:

2 Cubic foot capacity 15mL blast hose 30 mins blasting time per fill Deadman safety valve Compressor needed 185CFM 50HP	Size 1.4m x 660mmH x 870mmL Boron carbide nozzle Weight 120kg Filling funnel with screen
Other model DB500 etc of bigger capacity

Summarized Product Brochures

MAINTENANCE & PARTS

Machine Retrofit

CDCseries

Down Flow Type Dust Collector

Filter Bag Dust Collector

Machines DIY

Machines DIY Parts 1

Blast Pot & Parts

Wet Blast Apply

Airblast Cabinets